MASK FFP2 EEC MARKED 1 UNIT New

MASK FFP2 CE MARKED 1 UNIT

FB2002593

FORCOBAY SPAIN

Protective mask against dust particles, smoke, microorganisms, viruses and bacteria, manufactured according to FFP2 standards and CE conformity marking.

More details

AVAILABLE

1,80 €

Volume discounts

QuantityDiscountYou Save
2 10% Up to 0,36 €
5 15% Up to 1,35 €
10 20% Up to 3,60 €
DESCRIPTION

Personal protection mask against the presence in the air of dust particles, microorganisms, pathogens such as viruses, bacteria, fungi or the like.

It is made of materials of sufficient quality to facilitate a filtration efficiency greater than 94%.

It has a metallic adjustment band on the nose and double elastic strap.

This mask is disposable and its useful life with full effectiveness is 8 hours, after which its filtration efficiency is progressively reduced, as with all masks homologated under the FFP2 NR, EN149: 2001 + A1: 2009 and CEE standards. 2163.

It has an internal metal band with plasticized metal adjustment on the nose and double elastic strap.

This mask is disposable and its useful life with full effectiveness is 4 hours, after which its filtration efficiency is progressively reduced.


ESPECIFICATIONS

Outer Layer: non-woven Polypropylene fabric, white.
Middle Layer: high density Poliprolinemo blown fabric with internal coated metallic filament and two elastic adjustment straps.
Middle Layer: high efficiency cotton PM2.5.
Inner Layer: white polypropylene non-woven fabric.
Measurements (without unfolding): 175 x 130 mm, one size.


PRESENTATION

1 unit in a self-closing plastic bag for easy storage.


WARNINGS

This product complies with European health regulations as a respiratory protection mask, to be used by adults.

It is not a sterile product and therefore it is not suitable for medical use.

This mask does not protect against gases, vapors, solvents or in atmospheres with an oxygen index lower than 19.5%.

It should not be used without medical supervision by people with respiratory distress or heart problems.

The mask must not be exchanged between different people and cannot be washed.

It should be kept in dry places, free from humidity and at a temperature between 5º C and 30º C degrees.


INSTRUCTIONS FOR USE

Putting on a protective mask

PLACEMENT:
- Wash your hands with soap and water or disinfectant gel, following the steps indicated by the health authorities.
- Check that the mask is in good condition, without tears or perforations. To do this, the mask is held by the elastic bands and checked against the light.
- Taking the mask by the elastic bands and taking into account that the adjustment band to the nose must always be at the top, we take it to the face and place the elastic bands behind the ears, adjusting as much as possible on the nasal septum and chin.
- To readjust the mask, remove it or put it back on, we must always bear in mind not to manipulate the internal part if we have not previously washed or disinfected our hands.

WITHDRAWAL:
- Take the mask by the elastic bands, avoiding touching the fabric of the mask with your hands and removing it from the face.
- Dispose of the mask in the appropriate garbage container, following the instructions of the Authorities of each country.
- Its discharge must be controlled and in no case, it must be thrown on the public road or natural environment.

No customer comments for the moment.

Write a comment

MASK FFP2 CE MARKED 1 UNIT

MASK FFP2 CE MARKED 1 UNIT

Protective mask against dust particles, smoke, microorganisms, viruses and bacteria, manufactured according to FFP2 standards and CE conformity marking.
Product successfully added to the product comparison!